One of the pleasures of an extensive impulse response library is the ability to instantly switch between different tones to suit different styles of music, so it’s understandable to wonder exactly what are the best impulse responses for metal, rock, blues and so on. In this blog we’re going to guide you through some of the main considerations when selecting an IR for a metal sound.
At first sight, it might seem as though the answer is the same as for “What are the best guitar speakers for metal?” So you just have to find the best physical speakers for metal, find the equivalent IR, and you’re done, right?
If you did just pick your favourite Celestion speaker for metal and then download the impulse response files for that speaker, you’re going to get a great sound, no question. So if you’re in a hurry and just want to be in the right ballpark, just do that.
But getting metal tone isn’t just about the speaker. There’s cabinet configuration to think about, as well as microphone type and position. In addition, within the realm of impulse responses, your range of tonal options is far greater – so let’s explore a little deeper.
Definitive Metal Tone
There is, of course, no definitive metal tone, but a whole range of tones to choose from. Everyone will have their favourite, and just about any noteworthy metal band from the late 60’s to the present day is known for a distinctive sound in some respects, whether it’s speaker tone, playing technique, combination of different guitars, rhythm, tempo and so on, resulting in a wide range of different metal styles and close derivatives including thrash, grunge, death, doom, speed, black and more.
But, that said, let’s take a walk through some of the main elements that you can control through your choice of impulse response.
There are many good options in the Celestion speaker range that are also available as impulse responses if metal is your goal.
Vintage 30 – Built in 1986 with hard rock and metal in mind, the Vintage 30 impulse response is probably the safest choice if you aren’t feeling pulled in any other direction and if you want an “off the shelf” option you can just plug in and start generating some classic metal tone. Actually rated at 60 Watts, the V30 can handle a good amount of power, especially if used in a 4×12 cabinet. As a bonus, the Vintage 30 also works well for a range of other rock and blues sounds too, including low gain tones, so it’s a great all-rounder if you want to play other styles too. (That’s why we based our free IR mix on the Vintage 30 – available for download here.)
G12M Greenback – The M in “G12M Greenback” doesn’t stand for Metal, but it almost could, as there are many aficionados of this classic speaker who swear by its punch and definition to deliver a properly aggressive, metal tone. One of them is the renowned Japanese metal guitarist Masaki Murashita. His shootout video featuring the G12M Greenback IR should be all the proof you need (see Listening Resources at the end of this blog).
G12-65 – This is another serious contender that has some pretty solid metal pedigree (Metallica are reputed to have used them on their now legendary Master of Puppets album) and is ideal if you want to achieve an 80’s / thrash type of sound.
Alnico Blue – We wouldn’t normally recommend the physical Blue for those wanting a strong metal sound, as this 15 Watt speaker isn’t really built for that type of power. But tonally, the Blue has a lot going for it when it comes to delivering a gritty sound that would work great for an industrial type of metal. So using the Alnico Blue in IR form is a way to enjoy its distinctive tone without worrying about anything blowing up.
Redback G12H-150 – And what about the new Redback? Now also available as an IR, on paper the Redback has hard rock and metal written all over it, in terms of its ability to handle high gain sounds without distortion. But in the IR dimension, these physical world issues are much less of a problem – which means that opting for the Redback IR doesn’t lend any special advantage over its lower wattage cousins. That aside, the Redback has its own unique tone which, because it is so new, has not been adopted by any metal outfits so far. So its potential as a metal speaker is territory waiting to be explored…
Classic Lead 80 – Now available in IR form, we simply had to add the Lead 80 to our list of recommended impulse responses for metal. It’s ideally suited for lead or rhythm guitars with many of the qualities you need for a metal sound: super clear articulation even for fast shredding, as much aggression and punch as you could possibly wish for, and smooth, clean highs for those solos. It’s also common for lead players to combine the Lead 80 with a Vintage 30 in a 2×12 cabinet, so why not try mixing CL80 and V30 IRs together?
If you are only going to download one cabinet type, make it the 4×12. This will replicate the most popular metal cab arrangement which, in a physical setup, provides the level of power that metal guitarists are generally looking for.
However, if you decide to get the complete IR pack for your speaker type (all five cabinet options) then be sure to check out the 1×12 and 2×12 options too if you want to experiment with a tighter, punchier sound.
Microphones and Mic Mixes
It’s hard to overstate the difference in tone that you can achieve simply by switching microphone, mic position and mic mixes. And it’s perhaps here where the benefit of using IRs becomes most obvious – the ability to very quickly combine and switch between different microphones to achieve effects that would be time consuming to do in a physical setup, or physically impossible.
On our impulse responses you can choose between 3 main microphones – the Shure SM57, the Royer R-121 (ribbon mic) and the Sennheiser MD421. Each of the 3 main microphones has been recorded in 6 different mic positions (Balanced, Dark, Dark 2, Bright, Fat and Thin), giving 18 options, which you can blend as you wish.
Your “go to” choice here if you don’t want to work your way through 18 variations or do any mixing, is the SM57, Balanced option – this will give you a warm, well-rounded tone for classic metal.
But in fact, all the mic options have something to offer if you’re looking for a more specific metal tone, with each giving a slightly different feel. For a “tauter” metallic sound, opt for Thin or perhaps even Bright. For a heavier tone that emphasises the bass, try Dark or Dark 2.
You can also add in the Neumann TLM 107 room mic if you want to add some cavernous “doom” quality to the mix.
If you want some more mic options without the effort, we’d recommend using one our additional mic mixes that come with each cabinet IR. If you’re in a hurry, go straight for the R-121+SM57 mix (high gain option), which adds fullness and depth to the SM57 on its own.
The Best Impulse Response for Metal Could be Your Own Mix
Once you’re in the right ballpark with one of the above speakers in a 4×12 cabinet, you can take things in any direction you want. Depending on the type of DAW or amp modeller you’re using, you can experiment further to achieve a tone all of your own, by blending multiple IRs together. You can combine different speakers, different cabinet types and different mics together, to complement your playing style, or maybe even create a whole new metal genre.
Download the Impulse Responses Mentioned in This Blog
Celestion IR G12M Greenback 4×12 (Closed Back) Shootout Hard Rock/Metal
by Masaki Murashita
As well as showcasing the G12M Greenback very effectively, this video demonstrates the massive change in tone achievable by playing with mic combinations.
Celestion Plus Impulse Responses – Part 4 – METAL
by Hope Pole Studios
Includes demos of the Vintage 30, G12M Greenback, G12M-65 and the Alnico Blue.